Electric Cable Fitting ADSS Suspension Clamp

Suspension set for ADSS features: 

1.This product has uniform stress distribution and no stress concentration points, which can enhance the 

2. Rigidity of the cable installation point without additional damage to the optical cable; 

The tangent clamp has a high dynamic stress bearing capacity, which can effectively lift and fix the line; 

3. The rubber clamps change the vibration characteristics of the line, change the damping coefficient, and reduce wear; 

4.The casing is made of high-quality aluminum alloy, with strong mechanical properties and high corrosion resistance; 

5.The twisted wire has a smooth surface and smooth ends, which can increase the corona discharge voltage. 

6.The holding force reaches 20% of the ultimate tensile strength of the optical cable, and the line angle is less than 25 degrees!

Safety Note： 

It must be ensured that the extreme contact pressure under the fitting does not exceed the extrusion design limit of the ADSS optical cable. In the use of the tension value, it is necessary to ensure that the ADSS optical cable and the wire do not whip, and the load on the tower is as small as possible to avoid safety problems.